Super Model Car Sunday

The annual Super Model Car Sunday show was held at the West Coast Street Rod Club's Malaga clubrooms on Sunday July 11th. This years Super Model Car Sunday was the 12th running of the event, with over 800 models entered for the day, as well as trade stands and other entertainment on offer.



The first thing most people will notice when they arrive at Super Model Car Sunday is that there is always a good collection of Hot Rods and Kustoms outside the show, and many will spend hours walking around the streets checking out the full size show before they head inside to see the miniatures on display.



The cars on display inside ranged from crazy custom built cars that could only exist in model form to hot rods, street machines and kustoms and a wide range of exotics as well as a selection of race cars. Also on display were several model trucks, both static and remote controlled. Some local remote control enthusiasts also braved the cold weather to put on displays with their RC trucks and drift cars. Two of my favourite cars on display were the nostalgia style funny cars shown on this page.



If you want to see more photos from Super Model Car Sunday, head on over to the gallery on HighOctanePhotos.com, where there are over 200 more photos waiting for you.

American Independence Day, In Perth

Last Sunday was American Independence Day (July the 4th, for anyone that didn't already know) and Kate and I went to a local celebration put on by the American Womens Club of Perth. This is an event thats been going on for several years now and gets bigger every year, however it's the first time I've made it down to one. We had a good time, and will most likely go again next year.



The day was held at the Morris Buzzacott Reserve, in Kardinya, and the AWC had organised a small display of American cars and stalls selling hot dogs, American beers and soft drinks. There was also an arcade style basketball stall and a petting zoo. Inside the community centre hall were some stalls selling American snack foods and the extremely popular Krispy Kreme stall. The hall was also the venue for the Pledge of Allegiance and the singing of the National Anthems (both American and Australian).



Back outside again, and a gridiron had been marked out, where my old team, the Claremont Jets, played a scratch match as part of the 'American Sports Demonstration' on the day. A decent crowd lined the sides of the field of play to watch some good old American football.

Kim's Pizza Night and Cruise

A short while ago, on a Friday night, Kim (aka Lo-Mad) ran one of his 'when we feel like it' Pizza nights. The night consists of us gathering for pizza at Brando's Pizza in Victoria Park, standing around outside talking cars for a bit and then heading off on a cruise before stopping for coffee somewhere at the end of the night.



A small group made it to the gathering for pizzas at Brando's in Victoria Park, however Tuff Tin, Hey Jude and Extreme Eric were unable to join us for the cruise, which would eventually take us to Scarborough.



This time round, we cruised down to Hungry Jacks (To the rest of the world, it's Burger King, but that name was already taken when they opened here, so they called them Hungry Jacks instead) in Claremont (not far from where I grew up).





After we left Claremont, we headed down to Fremantle to cruise up and down the local strip (and to pick up Kim's other half) and then headed up the coast to Peter's By The Sea in Scarborough, where we finished the night off.





You can see more photos from the night here.

Cranksters Winter Madness 2 - Blacky's 57 Chev

Over the Foundation Day long weekend, the Cranksters Hot Rod Club and members of the Goodfella's Hot Rod Club as well as a number of other interested and talented individuals gathered at Ferret Boilermaking in Maddington for the second Cranksters Winter Madness weekend.



The idea of these weekends is to attempt to build a hot rod or custom over the course of a weekend. Last year it was Ben "Flathead" Forster's Los Drogas Model T coupe, this year it was Geoff "Blacky" Black's turn with his 1957 2 door Chevrolet Bel Air, the Moonshine Express.



Prior to the weekend, Mick "Redbeard" Rumbold of Mick's Mods in Kalgoorlie (that's Mick on the left in the photo, if you haven't guessed from his nickname) had built a 505 cubic inch big block Chev for the project, using a Dart block. Other prep work before the weekend included many hours of rust repair to the body by Blacky and Damo, who had been chosen to paint the car, and tack welding the HQ front end into the Chev chassis. Over the course of the weekend, the interior would be stripped out of the car, the body rubbed back, primered and painted. The doors were painted first, as they were to receive special treatment by signwriter Scully, who designed and painted the Moonshine Express signwriting. The body was removed from the chassis to enable the crew to split the jobs up over as many teams as possible, with separate teams taking car of the interior trim, wiring the body, preparing the chassis to be reunited with the body and polishing the multitude of chrome parts that make a 57 Bel Air complete.



Meanwhile, Drew and Russ were busy preparing a new hood lining, fabricating and trimming new door trims and retrimming the Range Rover seats that Blacky had chosen to be his new front seats. Glenn "Watto" Watson was hard at work cutting and shaping the sound and heat absorbent matting that now covers the floor of the Bel Air and anyone who looked like they didn't have anything to do was busy polishing all the miscellaneous bits of chrome trim that would have to be fitted to the car when it was time to put it all back together.



Late Saturday afternoon, the chassis team were happy with their progress and loaded the chassis onto the trailer so that Blacky could take it to the sand blasters. On it's return, it was set up for painting, as were the body and doors.



With all the major parts laid out waiting for paint, it was time for Damo and Scully to work their magic. Damo had already painted the doors in a makeshift paint booth outside, and before the rest of the paintwork commenced, Scully painted the Moonshine Express designs on the doors. Once the doors were painted, they were moved to another room and the workshop was cleared so that Damo could paint the chassis and body. The chassis was painted a standard underbody black, which the body received a coat of violet crumble purple paint with a satin finish. Both chassis and body were painted 'wet on wet', meaning the chassis was primered, then the body, then the chassis was painted black and the body in colour, with about 15 minutes between primer and colour.



Sunday would see teams fitting brakes, brake lines and fuel lines to the chassis, fitting the Turbo 400 to the back of the big block and continuing the fit out of the body, with the steering column getting fitted and a lot more wiring being run under the dash. The dash cluster was also painted and fitted with instrumentation, which Blacky would fit later on Sunday night.



Also on Sunday night, the team would attempt to fit the big Chev power plant. Unfortunately, the 'bolt on' headers would present a slight problem, as 2 of the pipes on each side of the motor fouled on the new front end. With time and resources at a premium, it was decided that this was one of those jobs that would have to be rectified after the weekend was over, and the pipes were cut back far enough to clear the chassis.



After the headers were modified and the engine mounts and front crossmember modified to suit the motor, the remainder of the exhaust was pieced together and tied in place, the workshop was re-arranged to prepare for the mounting of the body on the chassis and tools were put down for the night.

When Monday morning rolled around, it was time to get serious about putting the body on the chassis, at which point the wiring harness could be connected to the engine and the fuel and brake lines could be finished, but before that could happen, the exaust was finished and mounted and the tailshaft loop, which doubles as an exhaust hanger, was fitted.

The glaziers were on hand shortly afterwards to fit the front and rear glass before the team gathered again to lift the body onto the chassis.



Once the body was on the chassis, it was time to finish a couple of wiring and plumbing tasks and to fit up the doors, front sheet metal and radiator. Norm and Vicki from Aussie Desert Coolers were not only on hand to film the event for an upcoming DVD, they also supplied the radiator used in the build.



Now that everything was back together, it was time to fire up the car and drive it out of the workshop. After a few false starts, the big Chev fired and left two black stripes on the workshop floor as it left the building, coming to a stop surrounded by onlookers out the front of Ferret Boilermaking.



There are a lot more photos over on LandBarge.com, 396 of them in the Winter Madness 2 gallery.

It's the Little Things

I like it when I find an answer to a question I wasn't really asking, and it's happened to me twice in the last couple of weeks. It's usually something that I'll wonder about when I have no way of finding out the answer, and then forget about by the time I'm sitting in front of a computer with the whole internet in front of me, just begging to give me some answers.



The first time, was when I was browsing an American hot rod forum, the HAMB, and came upon a thread discussing desmodromic valve actuation and it's applications. I had been wondering for some time, just why it was that Ducati motorcycles had such a characteristic rattle at idle, and it turns out that they use a desmodromic valve system. That is, instead of a spring to push the valve closed, they use a second rocker arm that pushes it closed in much the same way that it is pushed open, just that it pushes up instead of down. In earlier days, these systems were much more prevalent than today, as early valve spring materials did not support engines running at the high rpm's that we now expect from performance motors. Desmodromic systems of the time had their own pitfalls, but offered enough benefits for them to be fairly widely used in the performance and motorsport arena. Today, the only major manufacturer still using a desmodromic type valve actuation system is Ducati, who seem to have ironed out most, if not all, of the bugs in the system.

The second time I had that feeling of "oooohhhhh.... so THAT's what that's all about" was yesterday, as I was sitting at my dentists waiting for an appointment. I don't normally read the magazines in waiting rooms, as there's usually not much that grabs my attention, however yesterday I decided to have a rifle through the pile and see what was on offer. After pushing the gossip rags to one side, and hunting around some more, I found an issue of Sophisticated Traveller, the Australian Financial Review's travel insert, that contained an article on California's Mission Trail. Hidden in that article, was the answer to my question "What is so special about El Camino Real?" We had noticed last time we were in the USA, that one of the street names that keeps popping up in a number of different towns was El Camino Real, and we weren't sure why, however, at the time, while intriguing, it wasn't intriguing enough for us to actually type the words into Google and go looking for an answer, but now I've got one, and I intend to share it with anyone who's gotten this far.

As you may already know, long before California was part of the United States of America, the Spanish pushed north from Mexico and established a series of 21 missions each approximately 1 days ride apart, at the same time, the Russians headed south from Alaska, as far as San Francisco, but that's another story. The Spanish missions spread from San Bruno in the state of Baja California Sur in Mexico, up to Mission San Francisco in Sonoma, California. The track that joined these missions together was known as El Camino Real, which translates to either The Royal Road, The Royal Highway or The Kings Highway, depending on who translates it. From 1683 until 1912, El Camino Real was an unpaved road, initially marked by yellow flowers from mustard seeds sprinkled along it's length by the padres who traveled it, but in 1912, the state of California decided to start paving this historic roadway. Over the years that followed, El Camino Real has become one of Calfornia's busiest non-Interstates.